Underfloor truck scale ESB

- Truck scale 18 resp. 20 x 3 m according to DIN 8119 (Option: 18x3,5m / 20x3,5m)
- Weighing range up to 60.000 kg
- One-piece truck scales and foundation tray
- wear resistant track surface made of special concrete
- Frost and thaw resistant
- Electro mechanical foundation - maintenance free
- Integrated lightning protection by potential equalizing and surge arrester
- Good drainage properties and accessibility to the weighing pit
- Low construction height of the foundation tray, inner depth of the tray 70 cm with reinforced foundation base. Consequently no strip foundations are required! 

Options:

- Increased installation height of the truck scale for vehicles with excess width
- Coverings for the gabs of the truck scale 

Low-floor truck scale EFS

- The truck scale for vehicles with extra widths
- Dirt is falling from the truck scale to the side of the scale
- The design of the truck scale is according to the design of the ESB-G truck scale
- Truck scale approx. 25 cm over-ground

Underfloor truck scale EFT

- Truck scale 18 resp. 20 x 3,5m
- Weighing range up to 60.000 kg
- One-piece truck scales bridge
- wear resistant track surface made of special concret
- Frost and thaw resistant
- Electro mechanical foundation - maintenance free
- Integrated lightning protection by potential equalizing and surge arrester

Remote indication WCON F3 

The remote indication WCON-F3 was designed specifically for outdoor use. Super-bright, sunlight viewable LED's with automatic brightness control allow an excellent visibility at direct sunlight or night on the indicator.

The specific wavelength of light allows, even in unfavorable weather conditions like fog and rain, a high-contrast representation of the display.

The graphic display allows the representation of alphanumeric characters and graphics and special characters. The remote indicator WCON-F3 is supplied in a galvanized, powder-coated housing with IP65 protection. The front page consists of a UV - resistant acrylic glass.

- 100 mm LED display
- Super-bright, daylight-capable LEDs
- Automatic brightness control for day and night operation
- Extra large viewing angle of > 140°
- Galvanized, powder-coated housing with IP65 protection
- Power supply: 100 - 230 VAC

Remote control

- The truck scale can be operated by means of the remote control from the driver's cab.
- Due to the ID-Code of the remote control the terminal identifies automatically, if it is the first or second weighing process.
- Additional Data, weighing values or statur reports will be displayed at the operator terminal in big digits (50 mm) or via the remote indication WCON F3. 

Remote control - Mobile Phone

Over remote control the truck scale will be fully operated by a commercial mobile phone.

- Display of data and weight values ​​of weighing the SWT or via a remote indicator
- Numeric input without switching on the 10-key phone keypad
- Possible use with any commercially available mobile phone (no internet required)
- Identify the user through the mobile number
- No ongoing costs for the cellular connection (charges only the calling user)
- Clear user interface via remote indicator
- Fast weighing sequences
- For the operation a computer system is not required

Option:

- Provision of data on the Internet at: meinewaage.com directly or via a GPRS connection

Video image recording ÜWA

By means of a network camera a picture of the weighing process can be saved on the PC-system and allocated to a weighing process.

EAW Macro for Microsoft Excel

The EAW Excel-macro is used for the analysis of the weighing data and offers possibilities to meet the requirements of the Federal Office for Agriculture and Alimentation (BLE) – with respect of the obligation to produce supporting documents.

- Printing of lists and delivery notes
- Address-master data
- Generator-/producer master data
- Analysis possibilities according to:

  - ID-numbers
  - Addresses
  - Sorts
  - Generator
  - Date/time

The newly developed software application e: maxx biogas was designed specifically for data acquisition of renewable resources in connection with truck scales in biogas plants.

This software meets the requirements of the Federal Office for Agriculture and Alimentation (BLE) – as far as the determination of harvest yield is affected.